Software Version: 1.09

Setup
ADSL Modem  AM200
 
Setup
Security
Applications & Gaming
Administration
Status
Basic Setup

 

DDNS

 

Advanced Routing

Internet Setup
ADSL Settings
Encapsulation:
Virtual Circuit ID:  VPI (Range 0 ~ 255)
 VCI (Range 0 ~ 65535)
Multiplexing: LLC VC
DSL Modulation:

IP Settings
Obtain IP Address Automatically (DHCP)
Set Static IP Manually
IP Address: . . .
Subnet Mask: . . .
Default Gateway: . . .
Primary DNS: . . .
Secondary DNS: . . .

Optional Settings
(required by some ISPs)
Host Name:
Domain Name:

Network Setup
Modem IP
Local IP Address: . . .
Subnet Mask: . . .

Network Address
Server Settings (DHCP)
Local DHCP Server: Enabled Disabled
Start IP Address: . . .
Number of Addresses:
IP Address Range: 192.168.1.2   to  192.168.1.254
Client Lease Time: Hour Min (Less than or equal to 72 hours)

Time Setup
Set Time Zone

Automatically adjust clock for daylight saving changes
Time Zone:

Configure Time Server (NTP)
Enable Automatic Time Server Maintenance
Primary Server:
Secondary Server:
Current Date and Time: 08/01/2006, 13:47:29
  Basic Setup

ADSL Settings: The values for this section must match those of your ADSL Internet connection. Please check with your Internet Service Provider to verify the correct settings.

IP Settings: The values for this section must match those of your ADSL Internet connection. Please check with your Internet Service Provider to verify the correct setting.




















Modem IP: The Modem is identified on the network by this address. Use the default value if you are unsure of what this setting should be.

Network Address Server Setting: The Modem is capable of assigning IP addresses to the computers on the network. If you do not have another DHCP server on the network, leave this setting enabled. You may specify the starting IP address, the number of addresses to assign, and the lease time for each address.